USED CLEVELAND LARGE VERTICAL MACHINING CENTER BM600H WITH CENTROID CONTROL

LARGE TABLE:17.7" x 70.8" (450x1800 mm)
DELIVERED NEW 9-2015
CENTROID CONTROL M400 WITH 15" LCD.
20 TOOL MAGAZINE
X, Y & Z-AXIS METAL TELESCOPING WAY COVERS
4 BOX WAYS DESIGN ON Y-AXIS FOR LONG-TERM RELIABILITY.
HALOGEN WORK LIGHT
AUTO LUBE SYSTEM

*JUST UPDATED WITH A NEW SOLID STATE HARD DRIVE WITH WINDOWS 10
AND A NEW POWER SUPPLY

NEW PRICE APPROX $90,000

entroid M400 control with 15" LCD
" 15 HP spindle motor, CAT40 spindle taper
" 8,000 rpm spindle speed
" Hardened & ground with Turcite-B coating guide way
" Double nut precision ball screws hardened & ground for high accuracy and long lasting
" FC30 Meehanite casting main frame with annealed & stress relieved for long term reliability
" 100% Laser tested for positioning accuracy & repeatability
" Box ways design on Y & Z axis to provide maximum rigidity & stability
" Standard way covers on all three axes
" Tool box & tools
" Coolant system
" Central lubrication system
" Built-in Quartz work light
" Portable hand wheel (opt)
" AUTOMATIC TOOL CHANGER (op)

FEATURES:
* ISO 9001 QUALITY ASSURANCE
* LATEST CENTROID CONTROL M400 WITH 15" LCD.
* 3-AXIS DIGITAL AC 1 KW SERVO DRIVE MOTOR
* CLASS 7 BEARING FOR SPINDLE RUN OUT LESS THAN 0.00015".
* 220 V 10 HP ELECTRONIC VARI SPEED WITH SPINDLE S CONTROL.
* HARDENED & GROUND TABLE / CENTER T-SLOT (GROUND FOR QUICK SETTING).
* MEEHANITE CASTING TO PROVIDE MAXIMUM RIGIDITY AND STABILITY.
* SQUARE SLIDE WAYS ON Y & Z-AXIS.
* SUPER WIDE SADDLE TO ENSURE ACCURACY MOVEMENT.
* 1-1/4" PRECISION GROUND BALL SCREWS WITH DOUBLE NUT FOR ACCURACY MOVEMENT
* HARDENED & GROUND X, Y & Z-AXIS WAY WITH TURCITE B COATING TO ELIMINATE STICK-SLIP.
* ATC UMBRELLA TYPE TOOL CHANGER, 20 MAGAZINE.
* SPINDLE TAPER CAT 40 OR BT 40.
* AUTOMATIC FLOOD (M8) COOLANT SYSTEM OR MIST COOLANT (M7), SPECIFY AT TIME OF ORDER.
* LASER COMPENSATION TO ENSURE HIGH ACCURACY +/-0.0004" POSITION 0.0002" REPEATABILITY.
* FINITE ELEMENT ANALYSIS (FEA)
* MACHINE MADE IN TAIWAN, CONTROL MADE IN U.S.A.

- SHOP FLOOR PROGRAMMING
- CUTTER RADIUS COMPENSATION
- TABLE GUARD - CANNED DRILLING CYLES
- CHIP TRAY - G-CODE BACKPLOT
- AUTO LUBE SYSTEM - DRILLING CYCLES
- OPERATION MANUALS - SPINDLE MULTI GEAR RANGE
- TOOLS & TOOL BOX - SPINDLE S FUNCTION
- LEVELING BOLTS & PADS

Table: ······························································· 17.7" x 70.8" (450x1800 mm)
Longitudinal travel: ············································· 59" (1500 mm)
Cross travel: ······················································ 24.4" (620 mm)
Vertical travel: ··················································· 23.6" (600 mm)
Spindle nose to table top (D): ······························ 4.7" to 28.3" (120-720 mm)
Load capacity: ··················································· 2200 lbs (1000 kgs)
Spindle taper: ···················································· BT40 or CAT40
Spindle speed: ·················································· 60 to 8000 rpm
Transmission of spindle & motor: ························ Belts
Spindle center to column front surface: ················· 25.5" (650 mm)
T slot: ····························································· 0.62*3*2.36" mm
Feed Rate
Rapid feed rate: ······················································ X/Y/Z: 250 ipm
AC Cutting feed rate: ··············································· 1 to 120 ipm
Motor
Spindle motor/max torque: ·································· 15 HP / 10 kW
Feed motors on XYZ: ·········································· 2 kW - AC Servo
Coolant pump: ··················································· 1/8 Hp
Lubrication pump:··············································· 150 W
Power requirement: ············································· 20 KVA, 3 Phase 208V to 230V (Max)
Automatic Tool Changer
No. of tools: ···················································· OPT
Max tool diameter: ·················································· 3.5" (90 mm)
Max tool weight: ······················································ 15 lbs (7 kgs)
Dimension & Weight
Length x Width x Height: ······································ 175" x 102.7" x 110.5"
Net weight: ························································· 9460 lbs (4300 kgs)

ADDITIONAL CONTROL FEATURES:

- 32 BIT PC BASED DSP TECHNOLOGY
- 128 MB. SOLID STATE HARD DRIVE
- 600 BLOCKS PER SECOND PROCESS SPEED
- 3.5" FLOPPY DISC DRIVE
- 4TH AXIS CAPABILITY
- HIGH SPEED CONTOURING
- AC SERVO DRIVES, 1 KW MOTORS
- UPDATEABLE SOFTWARE
- G-CODE TOOL PATH GRAPHICS
- SPINDLE FUNCTION WITH PROGRAMMABLE SPINDLE SPEED
- CAD/CAM READY
- CANNED DRILL CYCLES
- CANNED CYCLES (FACING, RECTANGULAR & CIRCULAR POCKET)
- CUTTER RADIUS COMPENSATION
- CONVERSATIONAL PROGRAMMING/SHOP FLOOR PROGRAMMING
- FANUC STYLE G & M CODE
- 3D TOOL PATH GRAPHICS
- 15" COLOR VGA LCD DISPLAY
- MATH HELP
- COOLANT FUNCTION KEYS
- RS-232, MOUSE & PARALLEL PORTS

PLUS OPTIONAL* DP4 PROBE, METAL MPG HANDWHEEL PENDENT, RIGID AND COMPRESSION TAPPING, DXF IN, CAD DRAWINGIN INPUT SOFTWARE, 20 TOOL ATC AND SEMI ENCLOSURE