USED WILTON 2445 30"HEAVY DUTY DRILL

Model2445
Push button control panel
• Power feed gear box fitted with an electro-magnetic clutch for power feed engagement and overload protection
ELECTRO-MAGNETIC CLUTCH DRIVE
• Heavy duty quill and spindle with manual quill locking
• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection
• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation
• Spindle gear box is equipped with steel hardened and ground shafts and gears
• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation
• Automatic tapping control equipped
• Oversize base is precision ground with T-slots for added versatility and stability
• Coolant tank and pump integrated into base

Swing (in.)30
Drilling Capacity, Steel (in.)2
Tapping Capacity, Steel (in.) 1-3/4
Spindle TaperMT-4
Spindle Travel (in.) 10
Spindle to Column Distance (max./in.) 15
Spindle to Base Distance (max./in.) 50
Spindle to Table Distance (min. - max./in.7 3/4"- 32"
Quill Diameter (in.)3.465
Number of Automatic Feeds 4
Automatic Feeds Rate (IPR)0.003, 0.006, 0.009, 0.013
Number of Spindle Speeds 9
Range of Spindle Speeds (RPM) 54, 98, 156, 198, 345,
456, 576, 822, 1,338
Table Size (in.) 33-1/2 x 23-1/2
Table Capacity (max./lbs.) 575
Number of T-slot 3
T-slot Size (in.) 5/8
Motor 4 HP,3.6 kw
wired 440V
Overall Dimensions (in./L x W x H) 53 x 30 x 108
Net Weight (lbs.) 2,405

STANDARD EQUIPMENT

• Automatic Tool Ejector

• Manual Quill Lock

• Coolant System

• Low Voltage at Switch