USED HAMMOND ROTO FINISH ROTO MAX CENTRIFUGAL DISC FINISHER

HAMMOND ROTO FINISH ROTO MAX CENTRIFUGAL DISC FINISHER
DESCRIPTION: The Hammond Roto Finish Roto Max is a High Speed, High Energy Centrifugal Finishing System for Deburring, Surface Improvements, Descaling and Finishing Parts Made of Metal, Rubber or Plastic. It is a Finishing Machine Designed to Machine Tool Specifications. Roto Max Machines Reduce Vibratory Process Cycles for Deburring Hard Metals, Rough Forgings, and Casting to the Finishing of Jewelry, Hardware, and Medical Implants.
Centrifugal Disc Technology Involves a Machine Consisting of a Motor Driven, Saucer Shaped Rotor Mounted Inside and Near the Base of a Large Processing Chamber. Both the Rotor and the Sationary Lower Ring are Coated with High Impact Resistant Molded Polyurethane for Extended Life.
Parts, Media and Compound are Loaded into the Processing Chamber, and the High-Speed Disc Rotation Creates the Centrifugal Force that Moves the Media and Parts up the Stationary Sidewall. When the Mass Reaches the Apex, the Force of Gravity Pulls the Material Back to the Disc. The Process Repeats.
The Doughnut Shaped Path of the Mass Produces a Highly Efficient Process that is up to 15 Times Faster than the Vibratory Finishing Process.
SEQUENCE OF OPERATIONS:
- Parts and Preselected Media are Placed into the Loading Hopper
- On Command, the Hopper is Elevated and Transfers its Contents into the Processing Chamber and a Rinse Bar Flushes the Hopper with Water
- The Controlled Start Up Speed of the Motor Begins the Rotation of the Rotor. Water and Chemical Compound are Metered in to the Processing Chamber Throught the Seal.
- Following the Timed Controlled Cycle, the Unit Shuts Down and the Solution is Drained Through the Hollow Core Drive Shaft, then the Processing Chamer Pivots Automatically to Empty its Contents of Parts and Media.
- Contents are Emptied onto a Multi Level Vibrating Screening System. The Top Separating Screen, with Openings Sized to Retain the Parts, Shakes the Media Through and Transports the Finshed Parts to the Front of the Machine.
NOTE: New Replacement Price is in Excess of $ 83,000.
CATALOGUE SPECIFICATIONS:
Capacity….............................................. 3 Cubic Feet
Tub Diameter….......................................... 28"
Tub Depth…............................................. 19"
Tub Opening Diameter….................................. 25"
Electrics…............................................. 480/3/60
Approximate Machine Dimensions…........................ 124" x 64"
Approximate Machine Height…............................ 105"
Approximate Machine Weight…............................ 10,000 Lbs.

Equipped with:
ALLEN BRADLEY PANELVIEW 550 SHOWS 1045 HRS
Variable speed control
Drag out RP rust inhibit stainless tank with plastic cleated conveyor
Auto trough flushing system
Automatic load hopper

Selling Price, as is from service
ELECTROTECH 440-729-4552 SOLD NEW
JOB NUM 6615 New price was approx $125,000.00 in june 2005

SPECIAL REDUCED PRICE AT THIS TIME $29,500.00

ROESLER Z800 SEMI AUTOMATIC EFFLUENT SYSTEM AVAILABLE SEE SEPERATE SHEET NEW WAS ADDITIONAL $19,000.00