USED SIP HYDR-8P JIG BORER

Working Surface 61 3/4"x 40 1/2"

Working Speeds (18) 40 to 2000 RPM on vert spindle
horiz spindle speeds (15) 40 - 1000 rpm

Quill Diameter 4.710

Spindle Quill Traverse 12"

Spindle Feed 8 Selections 0.001 to 0.0025 F.P.R.

Specifications:

Table
Length 61-1/2"
Width 40-1/2"
Number of T-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Hydraulic coarse setting speed 9 or 11 feet/min (*)
Milling feeds, up to 12"/min

Saddle of the vertical spindle
Nominal transverse travel 40"
Coarse setting speed 5 or 6 feet/min (*)
Milling feeds, in/min 1-2-3-6 or
1-1/8 2-1/4 3 3-1/2

Vertical spindle head
Tool shanks SIP-50-Taper
Quill travel 12"
Number of spindle speeds 18
Lowest speed 40 rpm
Highest speed 2000 rpm
Lowest feed, per revolution of spindle 0.001"
Number of quill feeds 8
Spindle rapid traverse 3-1/2 or 4 ft/min (*)

Cross Rail
Speed of the vertical travel 14 or 17 in/min (*)
Free space between uprights 57"
Distance from table top to vertical spindle nose 38-1/4" max.

Horizontal spindle head
Tool shank with SIP-50-Taper
Quill travel 12"
Number of spindle speeds 15
Lowest speed 40 rpm
Highest speed 1000 rpm
Number of quill feeds 8
Lowest feed, per revolution of spindle 0.001"

Saddle of the horizontal spindle head
Distance from table top to spindle center max. 31-1/2"
Distance from table top to spindle center min. 3-1/4"
Vertical power traverse
Coarse setting speed 17 or 21 in/min (*)
3 milling speeds 8-1/2 - 4-1/4 - 2 or
10-1/2 - 5 - 2-1/2 in/min (*)

Coolant pump
Delivery, per minute 12 pints/min
Reservoir capacity 5-1/2 gal.

Weights
Counterweight of the vertical spindle 420 lbs
Counterweight of the horizontal spindle head 1800 lbs
Net weight of machine appx. 17 tons

Overall size 10' L-R x 14' F-B x 10' 9"H

Permissible load
Permissible load on the worktable 2 tons

SPECIFICATIONS AND INFORMATION WAS TAKEN FROM MULTIPLE SOURCES SOME BUT NOT ALL CONFIRMED CUSTOMER SHOULD VERIFY

RACK FULL OF TOOLING SEE PICTURES

CLICK THE LINK BELOW TO SEE A VIDEO OF THIS MACHINE:
http://www.youtube.com/watch?v=pHM7Z9ESfQE