USED CLEVELAND VERTICAL CNC MILL W/ PROTOTRAK EDGE

MACHINE SPECIFICATIONS:

MACHINE SERIAL #0102006
CONTROL SERIAL #1482

WORK TABLE: 9" X 42"
X-AXIS TRAVEL: 30-1/4"
Y-AXIS TRAVEL: 12-3/4" less with DRO
Z-AXIS TRAVEL: 17"
QUILL TRAVEL: 4-7/8"
SPINDLE NOSE TO TABLE: 2-3/8" - 19-1/4"
SPINDLE CENTER TO COLUMN: 4-1/2" - 19-3/4"
RAM TRAVEL: 16"
SWIVEL (RIGHT/LEFT): 90 DEGREES
HEAD TILT (FRONT/BACK): ±45 DEGREES
OVER RAM TRAVEL: 360 DEGREES
600 TO 4200RPM/HI

QUILL DIAMETER: 3-3/8"
QUILL FEED: 0.002", 0.004", 0.006"
SPINDLE MOTOR: 2 HP
FLOOR SPACE: 88" X 67" X 84"
WEIGHT APROX: 2,400 LBS.

-HARDENED AND GROUND WORK TABLE AND X / Y SLIDEWAYS
-TURCITE LINING WAY ON X & Y-AXIS TO
-BUILT WITH RIGID MEEHANITE CASTING
-HEAVY DUTY DOVETAIL SLIDEWAY ON X, Y & Z-AXIS
-CENTER GROUND T-SLOT
-ANTI RUST CHROME QUILL
-PRECISION APEC CLASS 7 (P4) SPINDLE BEARING
-DOUBLE LOCK ON RAM, TABLE SADDLE & KNEE
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT, BACKLASH COMPENSATED ON X & Y
3 HP SPINDLE WITH VARI-SPEED 70 TO 4200 R.P.M.

MACHINE STANDARD ACCESSORIES:

-SLIDEWAY COVERS (FRONT & BACK)
-ONE SHOT LUBRICATION SYSTEM
-OPERATION MANUAL

EQUIPPED WITH:
PROTO-TRAK EDGE 2-AXIS CNC CONTROL SYSTEM
WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS
LINEAR & CIRCULAR INTERPOLATION, PROGRAM DOWNLOAD,
BOLT HOLE PATTERNS, PART GRAPHICS, TEACH MODE,
CANNED CYCLES, RS232 & MUCH MORE
IN MANUAL OPERATION, CONTROL BECOMES 3 AXIS DIGITAL READOUT
REMOTE STOP & GO SWITCH
GROUND BALLSCREWS ON TABLE & SADDLE