NEW CLEVELAND MODEL K6F VERTICAL TURRET HEAD MILL

MACHINE FEATURES:

-ISO 9001 QUALITY CERTIFIED
-HARDENED AND GROUND WORK TABLE AND X, Y & Z SLIDEWAYS
-TURCITE LINING WAY ON X & Y-AXIS TO ELEMINATE STICK-SLIP
-EXTRA LONG TRAVEL 18" ON Y AXIS
--FIXED HEAD DESIGN FOR MAXIMUM CUTTING PERFORMANCE
-HEAVY DUTY SQUARE SLIDEWAY ON Y & Z-AXIS FOR LONG TERM RELIABILITY
-CENTER GROUND T-SLOT
-ANTI RUST CHROME QUILL
-PRECISION APEC CLASS 7 (P4) SPINDLE BEARING TO ENSURE SPINDLE RUNOUT LESS THAN 0.0002"
-DOUBLE LOCK ON RAM, TABLE SADDLE & KNEE
-BUILT WITH RIGID MEEHANITE CASTING
-PRECISELY INTERNAL-GROUND SPINDLE
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT, BACKLASH COMPENSATED ON X & Y
-DISK HANDWHEEL ON X & Y-AXIS
-YASKAWA INVERTER
-FREQUENCY DRIVEN HEAD 3 PHASE 220 VOLTS, 6 HP. ELECTRONIC VARI-SPEED
-MACHINE MADE IN TAIWAN

MACHINE STANDARD ACCESSORIES:

-SLIDEWAY COVERS (FRONT & BACK)
-ONE SHOT LUBRICATION SYSTEM
-DRAW BAR
-OPERATION MANUAL
-TOOL BOX (HANDWHEELS, SCREWDRIVERS, OIL GUN & TOUCH-UP PAINT)
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT

MACHINE SPECIFICATIONS:

TABLE:
WORK TABLE: 11" X 58"
TABLE T-SLOTS (WxN): 0.63" X 3
TABLE LOAD MAX. (CENTER): 990 LBS. (CENTER)
TRAVELS:
X-AXIS TRAVEL: 43"
Y-AXIS TRAVEL: 18"
Z-AXIS TRAVEL: 19-11/16"
QUILL TRAVEL: 6"
SPINDLE NOSE TO TABLE: 1-3/4" - 21-3/8"
SPINDLE CENTER TO COLUMN: 2-5/8 - 25-1/2"
RAM TRAVEL: 19"
SWIVEL (RIGHT/LEFT): 90 DEGREES
OVER RAM TRAVEL: 360 DEGREES
SPINDLE:
SPINDLE TAPER: NST # 40
SPINDLE SPEED: 60 TO 840 RPM/LO, 660 TO 4000 RPM/HI
SPINDLE HI/LO GEAR RATIO: 4.76 : 1
QUILL DIAMETER: 4-5/16"
SPINDLE BEARINGS: ABEC CLASS 7/SUPER PRECISION N.T.N 7210 MATCH SETS
FEED:
QUILL FEED: 0.002", 0.004", 0.006"
MOTORS:
SPINDLE MOTOR: 6 HP. 220 V (480 V OPT.)
KVA RATING / AMPS 8 KVA. / 22 AMPS.
MANUAL ONE SHOT LUBRICATION: WAY OIL #2 BY HANGSTEFERS

ADDITIONAL INFORMATION:
COOLANT FLOW/CAPACITY: 6 GALLONS
FLOOR SPACE: 106" X 71" X 91"
WEIGHT: 3,900 LBS.

MACHINE OPTIONAL ACCESSORIES:

1. 6" ANGLOCK VISE W/SWIVEL BASE $ 320.00
2. 52 PC. CLAMPING KIT $ 80.00
3. ALIGN TABLE POWER FEED $ 720.00
4. INSTALLATION OF POWER FEED Y AXIS (AT CMS) $ 62.00
5. ALIGN CROSS POWER FEED $ 720.00
6. INSTALLATION OF POWER FEED Y AXIS (AT CMS) $ 62.00
7. AIR POWER DRAW BAR UNIT $ 710.00
8. INSTALLATION OF POWER DRAW BAR (AT CMS) $ 100.00
9. NEWALL DP700 2-AXIS DIGITAL READOUT SYSTEM $ 1,780.00
10. INSTALLATION OF 2 AXIS D.R.O. SYSTEM (AT CMS) $ 250.00
11. NEWALL DP700 3-AXIS DIGITAL READOUT SYSTEM $ 2,335.00
12. INSTALLATION OF 3 AXIS D.R.O. SYSTEM (AT CMS) $ 350.00

** WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE **

THE LIST PRICE OF THE MACHINE DOES NOT INCLUDE THE OPTIONS LISTED ABOVE.