USED SIP 8P JIG BORER

Accessories & Tooling: - Electrical Cabinet updated 5/99 by Swisstronic Precision, some of the electrics used include GE/Fanuc Series 90-30 PLC, ABB Circuit breaker, Spindle Master AC Drives and Sprecher & Schuh Relays(Swiss) - Heidenhaim 3 Axis Digital Readout System on Cross Travel of Rail Head, Vertical Travel on Rail, and Table - (1) Locating Dial Indicator (see pg. 12 in manual) - (1) Optical Alignment Device (see pg 110 & 111 in manual) - (1) Set Proving Bar w/accessories (see pg 116 & 117 in manual) - (1) Locating Microscope (see pg 114 & 115 in manual) - (1) Model P1-5 SIP Rotary and Tilt Table w/Index Plates 17 3/4 dia. - (1) DIP Model PD-GH Rotary Talbe 31 1/2 dia. - (28) pcs. End Mill Holders #4MT Draw Bolt Type - (5) pcs. SIP 50 Taper Master Holders for MT4 - (3) pcs. SIP 50 Taper to #2MT Draw Bolt Type - (2) pcs. SIP 50 Taper to #3MT Tang Type - (2) pcs. SIP 50 Taper to #4MT Tang Type - (5) pcs. Shell Mill Holders - (1) pc. Jacobs No. 20N Drill Chuck 3/8 to 1" w/#4MT - (1) Albrecht Keyless Drill Chuck 1 to 13mm Cap. w/SIP 50 Arbor - (17) pcs. SIP Adjustable Boring Tool Holders L4 Style w/#4MT Draw Bolt Type - (2) pcs. SIP 50 Taper Surfacing Head Holder, 1 pc. 5 1/2 dia.; 1 pc. 6" dia. Insert Tooling Type - (3) pcs. SIP 50 Boring Tool Holders Adjustable 1 3/4 to 2 1/4 and 3 3/8 to 6 1/4 - (1) pc. 4 3/4 dia. Boring & Facing Head w/SIP 50 Arbor - (2) pcs. 100mm dia. Boring w/25mm Bar Cap. w/Bar Set, Heads have feed, approx. 35 bars - (22) pcs. Drill Set w/No.2MT/No. 4MT Shanks - (5) pcs. Boring Bar Extension Holders - (2) Offset Boring Heads, one w/SIP 50, one w/Straight Arbor, many additonal cutting inserts, *Factory Manuals, Electric Prints on updated Electrics

Working Surface 61 3/4"x 40 1/2"

Working Speeds (18) 40 to 2000 RPM on vert spindle
horiz spindle speeds (15) 40 - 1000 rpm

Quill Diameter 4.710

Spindle Quill Traverse 12"

Spindle Feed 8 Selections 0.001 to 0.0025 F.P.R.

Specifications:

Table
Length 61-1/2"
Width 40-1/2"
Number of T-slots 10
Hydraulic travel 52"
Additional hand travel for fine setting 4"
Nominal measuring travel 55"
Hydraulic coarse setting speed 9 or 11 feet/min (*)
Milling feeds, up to 12"/min

Saddle of the vertical spindle
Nominal transverse travel 40"
Coarse setting speed 5 or 6 feet/min (*)
Milling feeds, in/min 1-2-3-6 or
1-1/8 2-1/4 3 3-1/2

Vertical spindle head
Tool shanks SIP-50-Taper
Quill travel 12"
Number of spindle speeds 18
Lowest speed 40 rpm
Highest speed 2000 rpm
Lowest feed, per revolution of spindle 0.001"
Number of quill feeds 8
Spindle rapid traverse 3-1/2 or 4 ft/min (*)

Cross Rail
Speed of the vertical travel 14 or 17 in/min (*)
Free space between uprights 57"
Distance from table top to vertical spindle nose 38-1/4" max.

Horizontal spindle head
Tool shank with SIP-50-Taper
Quill travel 12"
Number of spindle speeds 15
Lowest speed 40 rpm
Highest speed 1000 rpm
Number of quill feeds 8
Lowest feed, per revolution of spindle 0.001"

Saddle of the horizontal spindle head
Distance from table top to spindle center max. 31-1/2"
Distance from table top to spindle center min. 3-1/4"
Vertical power traverse
Coarse setting speed 17 or 21 in/min (*)
3 milling speeds 8-1/2 - 4-1/4 - 2 or
10-1/2 - 5 - 2-1/2 in/min (*)

Coolant pump
Delivery, per minute 12 pints/min
Reservoir capacity 5-1/2 gal.

Weights
Counterweight of the vertical spindle 420 lbs
Counterweight of the horizontal spindle head 1800 lbs
Net weight of machine appx. 17 tons

Permissible load
Permissible load on the worktable 2 tons

PURCHASED FROM LARGE MFG CO WHO KEEP IT IN A SEPARATE ROOM AND GAVE US THE FOLLOWING INFORMATION ON MAINTAINENCE
REBUILT 1978
DIGITAL READOUT ADDED1996
NEW COUNTER BALANCE 1991
****NEW ELECTRICAL CONTROLS 1999

INFORMATION WAS GIVEN WHEN MACHINE PURCHASED BUT NOT CONFIRMED, NOR GUARANTEED, THIS ALSO APPLIES TO SPECIFICATIONS