CLEVELAND K3F 1152 / 1158 ELECTRONIC VARI-SPEED KNEE MILL

MACHINE FEATURES:

-ISO 9001 QUALITY CERTIFIED
-HARDENED AND GROUND WORK TABLE AND X, Y & Z SLIDEWAYS
-TURCITE LINING WAY ON X & Y-AXIS TO ELEMINATE STICK-SLIP
-BUILT WITH RIGID MEEHANITE CASTING
-HEAVY DUTY SQUARE SLIDEWAY ON Y & Z-AXIS FOR LONG TERM RELIABILITY.
-CENTER GROUND T-SLOT
-ANTI RUST CHROME QUILL
-PRECISION APEC CLASS 7 (P4) SPINDLE BEARING TO ENSURE SPINDLE RUNOUT LESS THAN 0.0002"
-DOUBLE LOCK ON RAM, TABLE SADDLE & KNEE
-PRECISELY INTERNAL-GROUND SPINDLE
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT, BACKLASH COMPENSATED ON X & Y
-3 PHASE 220 / 440 VOLTS, 3 HP. SPINDLE WITH ELECTRONIC VARI-SPEED 70 TO 4200 R.P.M.
-YASKAWA INVERTER
-MACHINE MADE IN TAIWAN

MACHINE STANDARD ACCESSORIES:

-SLIDEWAY COVERS (FRONT & BACK)
-ONE SHOT LUBRICATION SYSTEM
-DRAW BAR
-OPERATION MANUAL
-TOOL BOX (HANDWHEELS, SCREWDRIVERS, OIL GUN & TOUCH-UP PAINT)
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT

MACHINE SPECIFICATIONS:

TABLE:
WORK TABLE: 11" X 52" (11"X 58" OPT.)
TABLE T-SLOTS (WxN): 0.63" X 3
TABLE LOAD MAX. (CENTER): 924 LBS. (CENTER)
TRAVELS:
X-AXIS TRAVEL: 37" (43" OPT.)
Y-AXIS TRAVEL: 18"
Z-AXIS TRAVEL: 19-5/8"
QUILL TRAVEL: 5"
SPINDLE NOSE TO TABLE: 1" - 20-5/8"
SPINDLE CENTER TO COLUMN: 5-1/4 - 26-1/8"
RAM TRAVEL: 19"
SWIVEL (RIGHT/LEFT): 90 DEGREES
HEAD TILT (FRONT/BACK): ±45 DEGREES
OVER RAM TRAVEL: 360 DEGREES
SPINDLE:
SPINDLE TAPER: NST #30 OR R8
SPINDLE SPEED: 70 TO 500 RPM/LO, 600 TO 4200 RPM/HI
SPINDLE HI/LO GEAR RATIO: 8.4 : 1
QUILL DIAMETER: 3-3/8"
SPINDLE BEARINGS: ABEC CLASS 7/N.T.N SUPER PRECISION 7207 MATCH SETS
FEED:
QUILL FEED: 0.002", 0.004", 0.006"
MOTORS:
SPINDLE MOTOR:3 HP. 3PH 220 V. (480 VOLTS OPT.)
KVA RATING / AMPS 4 KVA. / 15 AMPS.
MANUAL ONE SHOT LUBRICATION: WAY OIL #2 BY HANGSTEFERS

ADDITIONAL INFORMATION:
COOLANT FLOW/CAPACITY: 6 GALLONS
FLOOR SPACE: 104" X 78" X 90"
WEIGHT: 3,400 LBS.

MACHINE OPTIONAL ACCESSORIES:

1. EXTENSION TO 58" TABLE $ 800.00
2. COOLANT SYSTEM $ 350.00
3. CHIP TRAY $ 250.00
4. ELECTRIC BOX W/ CONTROL PANEL $ 450.00
5. 6" RISER BLOCK: 16.5" OD $ 780.00
6. 6" ANGLOCK VISE W/SWIVEL BASE $ 320.00
7. RIGHT ANGLE ATTACHMENT $ 850.00
8. SLOTTING UNIT $ 1,095.00
9. 52 PC. CLAMPING KIT $ 70.00
10. AUTO LUBE UNIT $ 350.00
11. HALOGEN WORK LIGHT $ 225.00
12. ALIGN TABLE POWER FEED $ 625.00
13. SERVO TABLE POWER FEED $ 745.00
14. ALIGN CROSS POWER FEED $ 725.00
15. SERVO CROSS POWER FEED $ 995.00
16. ALIGN KNEE POWER FEED $ 725.00
17. SERVO KNEE POWER FEED $ 995.00
18. (Z) KNEE RAPID FEED, BUILT IN 1HP. $ 900.00
19. AIR POWER DRAW BAR UNIT $ 685.00
20. HIGH VOLTAGE OPT. $ 700.00
21. NEWALL C80 2-AXIS DIGITAL READOUT $ 1,445.00
22. INSTALLATION OF ANY DIGITAL READOUT SYSTEM (2-AXIS / 3-AXIS) $ 250.00/$ 350.00

** WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE **

THE LIST PRICE OF THE MACHINE DOES NOT INCLUDE THE OPTIONS LISTED ABOVE.