NEW CLEVELAND VERTICAL TURRET HEAD MILL

CLEVELAND K2V 942 / 949 VARI-SPEED KNEE MILL

MACHINE FEATURES:

-ISO 9001 QUALITY CERTIFIED
-HARDENED AND GROUND WORK TABLE AND X / Y SLIDEWAYS
-TURCITE LINING WAY ON X & Y-AXIS TO ELEMINATE STICK-SLIP
-BUILT WITH RIGID MEEHANITE CASTING
-HEAVY DUTY DOVETAIL SLIDEWAY ON X, Y & Z-AXIS
-CENTER GROUND T-SLOT
-ANTI RUST CHROME QUILL
-PRECISION APEC CLASS 7 (P4) SPINDLE BEARING TO ENSURE SPINDLE RUNOUT LESS THAN 0.0002"
-DOUBLE LOCK ON RAM, TABLE SADDLE & KNEE
-PRECISELY INTERNAL-GROUND SPINDLE
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT, BACKLASH COMPENSATED ON X & Y
-3 PHASE 220 / 440 V, 3 HP SPINDLE WITH MECHANIC VARI-SPEED 70 TO 4200 R.P.M.
-MACHINE MADE IN TAIWAN

MACHINE STANDARD ACCESSORIES:

-SLIDEWAY COVERS (FRONT & BACK)
-ONE SHOT LUBRICATION SYSTEM
-DRAW BAR
-OPERATION MANUAL
-TOOL BOX (HANDWHEELS, SCREWDRIVERS, OIL GUN & TOUCH-UP PAINT)
-PRECISION GROUND LEAD SCREW WITH DOUBLE BRASS-NUT

MACHINE SPECIFICATIONS:

TABLE:
WORK TABLE: 9" X 42" (49" OPT.)
TABLE T-SLOTS (WxN): 0.63" X 3
TABLE LOAD MAX. (CENTER): 616 LBS. (CENTER)
TRAVELS:
X-AXIS TRAVEL: 30-1/4" (37-1/4" OPT.)
Y-AXIS TRAVEL: 12-3/4"
Z-AXIS TRAVEL: 17"
QUILL TRAVEL: 4-7/8"
SPINDLE NOSE TO TABLE: 2-3/8" - 19-1/4"
SPINDLE CENTER TO COLUMN: 4-1/2" - 19-3/4"
RAM TRAVEL: 16"
SWIVEL (RIGHT/LEFT): 90 DEGREES
HEAD TILT (FRONT/BACK): ±45 DEGREES
OVER RAM TRAVEL: 360 DEGREES
SPINDLE:
SPINDLE TAPER: R8 OR NST #30
SPINDLE SPEED: 70 TO 500RPM/LO, 600 TO 4200RPM/HI
SPINDLE HI/LO GEAR RATIO: 8.4 : 1
QUILL DIAMETER: 3-3/8"
SPINDLE BEARINGS: ABEC CLASS 7/N.T.N SUPER PRECISION 7207 MATCH SETS
FEED:
QUILL FEED: 0.002", 0.004", 0.006"
MOTORS:
SPINDLE MOTOR: 3 HP 3? 220 V / 440 V
KVA RATING / AMPS 4 KVA. / 15 AMPS.
MANUAL ONE SHOT LUBRICATION: WAY OIL #2 BY HANGSTEFERS
ADDITIONAL INFORMATION:
COOLANT FLOW/CAPACITY: 6 GALLONS
FLOOR SPACE: 88" X 67" X 84"
WEIGHT: 2,400 LBS.

**WE OFFER SPECIAL PACKAGE PRICES!

MACHINE OPTIONAL ACCESSORIES:

1. EXTENSION TO 49" TABLE $ 500.00
2. COOLANT SYSTEM $ 350.00
3. CHIP TRAY $ 250.00
4. ELECTRIC BOX W/ CONTROL PANEL $ 450.00
5. 6" RISER BLOCK $ 650.00
6. 6" ANGLOCK TYPE VISE W/SWIVEL BASE $ 320.00
7. HORIZ. MILLING ATTACH., RIGHT ANGLE $ 850.00
8. SLOTTING UNIT $ 1,095.00
9. 52 PC CLAMPING KIT $ 70.00
10. AUTO LUBE UNIT $ 350.00
11. 11 PC R-8 COLLET SET (1/8" - 7/8") $ 115.00
12. 12 PC R-8 LYNDEX COLLET SET (1/8" - 7/8") $ 255.00
13. HALOGEN WORK LIGHT $ 225.00
14. ALIGN TABLE POWER FEED $ 625.00
15. SERVO TABLE POWER FEED $ 745.00
16. ALIGN CROSS POWER FEED $ 725.00
17. SERVO CROSS POWER FEED $ 995.00
18. ALIGN KNEE POWER FEED $ 725.00
19. SERVO KNEE POWER FEED $ 995.00
20. KNEE RAPID FEED, BUILT IN 1HP $ 900.00
21. AIR POWER DRAW BAR UNIT $ 685.00
22. NEWALL C80 2-AXIS DIGITAL READOUT $ 1,445.00
23. INSTALLATION OF DRO SYSTEM (2/3-AXIS) $ 250.00 /$ 350.00

** WE RESERVE THE RIGHT TO CHANGE DESIGN, COLOR, SPECIFICATIONS, OR PRICE WITHOUT NOTICE **

THE LIST PRICE OF THE MACHINE DOES NOT INCLUDE THE OPTIONS LISTED ABOVE.