USED SAMSTAR HEAVY DUTY 32 X 120 LATHE

TURNING DIAMETER OVER BED: 32"
DISTANCE BETWEEN CENTERS: 120"
TURNING DIAMETER OVER CROSS SLIDE: 22"
TURNING DIAMETER IN GAP: 43"
BED WIDTH: 21.750"
SPINDLE SPEEDS - FORWARD (18 CHANGES): 6 - 800 RPM
SPINDLE BORE: 5"
SPINDLE MOUNT/TAPER: CAMLOCK D1-11 / MT6
LONGITUDINAL FEEDS (64 CHANGES): .00375 - .928 IPR
CROSS FEEDS (64 CHANGES): .00188 - .464 IPR
RAPID FEED LONGITUDINAL: 106 IPM
RAPID FEED CROSS SLIDE: 53 IPM
MAX CROSS SLIDE TRAVEL: 19.750"
MAX COMPOUND SLIDE TRAVEL: 8"
INCH THREADING (26 CHANGES): 14 - 3/16 TPI
METRIC THREADING (50 CHANGES): 1 - 240 MM
DIAMETRIC PITCH THREADING (24 CHANGES): 28 - 1 TPI
MODULE PITCH THREADING (53 CHANGES): .5 - 120 MM
TAILSTOCK TAPER: MT5
2 SPEED TAILSTOCK QUILL STROKE: 10"
MOTOR RATING: 20 HP
OVERALL DIMENSIONS (L x W x H): 205" x 62" x 65"
APPROXIMATE WEIGHT: 13,000 LBS.
DUAL VOLTAGE 220/440/3 WIRED 440/3 AT THIS TIME
HEAVY DUTY ONE PIECE CONSTRUCTION
HARDENED & GROUND BED WITH GAP
5" SPINDLE BORE
CLUTCH & BRAKE SYSTEM
HARDENED AND GROUND WAYS
4 WAY RAPID TRAVERSE
3 JAW CHUCK
17" STEADY REST
DISC FROM INFORMATION PROVIDED MUST VERIFY