Model: M-4660 Square Head
Sept 1979 - Final inspection date before shipment
Maximum Swing Over Bed ................ 20"
Maximum Swing Over Carriage Guides .... 17.75"
Maximum Swing Cross Slide ............. 10.25"
Cross Slide Cross Travel, X-Axis ...... 10"
Cross-Slide Cross Travel, Z-Axis ...... 23.37"
Bar Capacity, Round ................... 3.5"
Maximum Distance Spindle to Turret .... 36.25"
Spindle Borer ........................3.500
Spindle Nose .......................... A1-8
Speeds (24) ........................... 25-1500 RPM
Cross Carriage Feeds .................. .002-.019 IPR
Longitudinal Carriage Feeds ........... .005-.047 IPR
Hex Turret Feeds ...................... .004-.045 IPR
Machine Weight ........................ 7,300 Lbs
Main Motor 7.5/15 HP
EQUIPPED WITH:
2 Jaw Chuck - Manual Operated
Square Head Pre-Selector Headstock
6-Position Turret
4-Position Tool Post
Rear Tool Block
Turret Tooling: 1 Slide Tool
Power Rapid Traverse on Cross Slide
Coolant System
Work Light
2 Die Heads on Turret; 1 Box Tool on Turret; 3 Flange Holders on Turret;
1 Drill Chuck on Turret - mounted on machine
20 HP 10 HP 2-Speed Motor with Controls
ELECTRICS: 440 volts 3Ph
OPTIONAL:
LARGE MASTER COLLET NOSE WITH SPINDLE MOUNT FOR 3 1/2" BORE MACHINE A 1-8
(29) COLLET PADS: Most Like New
(21) Round Collets:3/8", 7/16", 1/2", 5/8",3/4", 7/8", .980, 1",
1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2 7/16"
(3) Hex Collets: 7/8", 1 1/4", 1 1/2"
(5) Square Collet: 1/2", 5/8", 3/4", 1", 1 1/4"
