Swing Over Bedways 22"
Swing Over Cross Slide 14.5"
Swing Over Gap 37"
Center Distance 68"
Spindle Nose D1-11 Camlock
Spindle Bore 3.5625"
Spindle Speeds 20 - 1,000 RPM (12)
Spindle Motor 12.5 HP
Feeds 0009" - .051" per Rev
Threads (English) 2 - 112 TPI (54)
Threads (Metric) .25 - 14 (30)
Tailstock Quill Taper #5 MT
Tailstock Quill Diameter 3.250"
Tailstock Quill Travel 7"
Machine Dimensions 130"x55"x60"
Machine Weight Approximately 6,000 lbs.
Machine Wired 220V/3PH
Manufactured in England
12" 3 Jaw Chuck
20" 4 Jaw Chuck
No. 5 MT Jacobs Drill Chuck
Steady Rest
Taper Attachment
Hardened Bedways in Very Good Condition
5.5" Square Tool Post
Full Length Back Splash Guard
Thread Chasing Dial
