Swing over triple V bed 28"
Swing over cross slide 17.3"
21 spindle speeds 15-1400 RPM
Spindle thru bore/nose (front and rear) 5.5"/Camlock D1-11
Main drive motor 20 HP
42 Longitudinal feeds range .003 - .121 IPR
42 Cross feeds range .0015 - .06 IPR
42 Metric threads 1 - 88mm/rev
42 Inch threads 1 - 88 TPI
Quill Diameter (MT) 3 1/2: (MT5)
Quill Travel 7"
28" x 160" w/5 1/2" Spindle Bore
21 Spindle speeds (constant 1.26 progressive ratio)
from 15 to 1400 RPM
Heavy duty headstock w/20 HP main drive
Spindle supported in Precision Timken roller bearings
Heavy Duty 17" wide cross ribbed bed with
triple-V bedways
Four leg support for 157" between centers
4 way rapid traverse
Full length (31" long) cross slide for more precise
"X"-axis movement w/dual T-slots for rear
fixturing
Inch/metric threads without end gear change
Hardened and ground bedways
Dual D1-11 camlock quick change spindle noses
(front and rear)
Fully clutched headstock (with separate clutches
for forward, reverse & brake)
