Equipment
Lathes
Lathes, Toolroom Precision
USED JET 13" x 40" Geared-Head Lathe
Sold

USED JET 13" x 40" Geared-Head Lathe

Lathes, Toolroom Precision
Manufacturer:
JET
Model:
GHB 1340 A
Condition:
New - In-Stock
Year:
2012
Stock #:
3734
One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quiet operation Fast, easy speed changes Hardened and ground gears are featured in the headstock and gearbox D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings Headstock is constantly being oiled during operation Gearbox gives wide inch threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground Gap bed section provided for larger diameter work Independent leadscrew and feed rod Spindle actuation control is apron mounted Compound and cross slide have backlash elimination Tailstock may be offset for turning tapers and includes an inch-metric graduated quill coolant pan included 6" 3-jaw direct mount chuck with top reversing jaws 12" face plate Four-way tool post Steady and follow rest Center and headstock center sleeve Threading dial Micrometer bed stop Factory specs included above but must be verified

SWING OVER BED (IN.)13"
SWING OVER CROSS SLIDE (IN.)7-25/32"
SWING THROUGH GAP (IN.)18-3/4"
CARRIAGE TRAVEL (IN.)35
COMPOUND SLIDE TRAVEL (IN.)2-11/16
CROSS SLIDE TRAVEL (IN.)6-5/16
DISTANCE BETWEEN CENTERS (IN.)43"
FOLLOW REST CAPACITY (IN.)2-3/8
LENGTH OF GAP (IN.)8
MAX. TOOL SIZE (IN.)5/8 x 5/8
NUMBER OF INCH THREADS38
NUMBER OF LONGITUDINAL AND CROSS FEEDS40
NUMBER OF METRIC THREADS23
NUMBER OF SPINDLE SPEEDS8
RANGE OF CROSS FEEDS (IN./REV.).0012 - .0345
RANGE OF INCH THREADS (TPI)3-1/2 - 80
RANGE OF LONGITUDINAL FEEDS (IN./REV.).0036 - .0325
RANGE OF SPINDLE SPEEDS (RPM)70 - 2,000
SPINDLE BORE (IN.)1.375"
SPINDLE MOUNTD1-4
SPINDLE TAPER (WITH SLEEVE)MT-5 (MT-3)
STEADY REST CAPACITY (IN.)2-3/4
TAILSTOCK SPINDLE TRAVEL (IN.)2-3/4
TAPER IN TAILSTOCK SPINDLEMT-3
WIDTH OF BED (IN.)7-3/8
RANGE OF METRIC THREADS MM.45 - 10
RANGE OF LONGITUDINAL FEEDS (IPR).0018 - .0374
RANGE OF CROSS FEEDS (IPR).0006 - .0130
STYLEGeared Head
MODELGHB-1340A
MOTOR HORSEPOWER2 HP
MANUFACTURERS PART NUMBER321119
PREWIRED 220 volt 1 ph