OSP 5000L -G CNC Control with Full CRT
Controlled Axes: 2
Swing Over Bed: (inch) 10"
Maximum Turning Diameter x Maximum Work Length (Chuck Work): 5.91" x 4.72"
Maximum Turning Diameter x Maximum Work Length (Shaft Work): 5.91" x 9.84"
Distance Between Centers: 9.84"
Main Spindle:
Spindle Diameter at Front Bearing: 3.15"
Spindle Bore (inches) 1.77"
Spindle Nose: 5.51"
Internal Taper: 2.36" (6 degrees)
Range of Spindle Speeds: 60 - 6,000 rpm
Carriage (Z-Axis):
Carriage Travel: 11.22"
Minimum Input Increment: 0.0001"
Cutting Feedrate: 0.0001 - 40.0000 ipr
Rapid Traverse Speed: 472 ipm
Cross Slide (X-Axis):
Cross-Slide Travel: 5.91" (5.51 + 0.4)
Minimum Input Increment: 0.0001"
Cutting Feedrate: 0.0001 - 40.0000 ipr
Rapid Traverse Speed: 472 ipm
12 Position Turret:Type: V12
Size of OD Turning Tool: 3/4" x 3/4"
Size of ID Turning Tool: 1-1/4"
Bed:
Length of Slideway: 25.4"
Width of Slideway: 16.54"
Hydraulic Tailstock.:
Diameter of Quill: 2.17"
Taper of Center: #4 Morse Taper
Quill Stroke: 2.36"
General:
Main Spindle Drive Motor: 10 / 15 Horsepower (continuous / 30 min.)
Electrical: 220 / 440 Volt, Three Phase With 23 kva transformer wired 440
Overall Dimensions (inches) 70" x 82"
Weight (lbs) 7,500
Kitagawa 6 3/4" Three Jaw Power Chuck.
* Collet Chuck included
Coolant system w skimmer
and attached Aercology mist and smoke unit
some Tooling
Manuals incl. maint,ac spind dv, alarm &error
Showa Lubrication System.
Quatech sse-100d g serial to ethernet port in control
Spindle Nose A2-6
General specifications from literature and must be verified
